[netperf-talk] Testing on Freescale MPC8313ERDB

[Dominic Lemire]

Hello,

I need a quick opinion regarding the results below. Basically, I just 
wanted to confirm that my "gigabit Ethernet" board (Freescale MPC8313ERDB) 
is really capable of doing gigabit Ethernet... The bulk data transfer test 
gives the same results when I connect it to a computer with 10/100 
Ethernet or gigabit, so I just want to check with you before I complain to 
Freescale...

Thanks,

Dominic

----- Connecting to a computer with 10/100 Ethernet ------
PHY: e0024520:04 - Link is Up - 100/Full

# ./netperf -H 192.168.1.1
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 
(192.168.1.1) port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    10.01      94.08

------ Connecting to a computer with Intel 82545GM Gigabit Ethernet (rev 
04) ------
PHY: e0024520:04 - Link is Up - 1000/Full

# ./netperf -H 192.168.1.1
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 
(192.168.1.1) port 0 AF_INET
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    10.00      93.48
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.netperf.org/pipermail/netperf-talk/attachments/20100505/750f1471/attachment.html>