[netperf-talk] Netperf 2.3.7 from OpenSS7

[Frank Schuster]

Hello,

thank you for your reply.
I try to install the netperf-2.4.5.tar.gz under debian 5.0.

If I use ./configure --enable-sctp it runs without errors but the lines where sctp comes in:
checking for netinet/sctp.h... no
checking for main in -lsctp... no
checking for struct sctp_event_subscribe.sctp_adaptation_layer_event... no

Locate says: /usr/src/openss7-0.9.2.G/sctp-0.2.27/include/netinet/sctp.h
And then I tried this  ./configure --enable-sctp CC="gcc -I/usr/src/openss7-0.9.2.G/sctp-0.2.27/include" but it doesn't help.
I know this ist from openss7, but I think it have to work, too. Or if not, where can I get this file?

And the second question is, if I do make after configure (yes, I do it without sctp) I see this:
/usr/lib/gcc/i486-linux-gnu/4.3.2/../../../../lib/libsocket.a(libsocket_la-socket.o): In function `__sock_sendto_r':
/usr/src/build_opennss7/strsock/../../openss7-0.9.2.G/strsock/src/lib/socket.c:1318: undefined reference to `__libc_sendto'
/usr/lib/gcc/i486-linux-gnu/4.3.2/../../../../lib/libsocket.a(libsocket_la-socket.o): In function `__sock_accept_r':
/usr/src/build_opennss7/strsock/../../openss7-0.9.2.G/strsock/src/lib/socket.c:514: undefined reference to `__libc_accept'
/usr/lib/gcc/i486-linux-gnu/4.3.2/../../../../lib/libsocket.a(libsocket_la-socket.o): In function `__sock_bind_r':
...and so on.

I searched the web for this error and what I only found is that I need the libc. But I have installed the libc, I'm using currently the gcc in version 4.3.2.
Do you know something what I can do there? Is it a problem, that I installed the OpenSS7 before netperf? Or isn't it possible to run both netperf and iperf at the same time on the server?
Is this a problem with Debian 5.0 or someting else?

Regards
Frank

> -----Ursprüngliche Nachricht-----
> Von: "Rick Jones" <rick.jones2 at hp.com>
> Gesendet: 22.10.09 19:06:55
> An: Frank Schuster <frank.schuster01 at web.de>
> CC: netperf-talk at netperf.org
> Betreff: Re: [netperf-talk] Netperf 2.3.7 from OpenSS7


> Frank Schuster wrote:
> > Hello,
> > 
> > I have a problem with the netperf package from the openss7 page, I hope
> > somebody can help me. I can't execute the SCTP_STREAM test, I don't find any
> > options by configure and in the manual where I can enable this test.
> 
> If the openss7 folks didn't add an --enable-sctp to their ./configure script, 
> then there is no way to run SCTP tests with those binaries.
> 
> > 
> > So my question is what can I do?
> > Is there a known problem?
> > 
> > And if the problem is unknown, can I use the netperf version from this page
> > with the openss7 packages?
> 
> Netperf has never supported mixed versions between netperf and netserver, and to 
> get SCTP tests, both netperf and netserver have to be compiled after a 
> ./configure --enable-sctp....
> 
> I don't recall what changes the openss7 folks made - you will have to ask them - 
> but in theory if "SCTP is SCTP" then you should be able to take a 2.4.5 source 
> tar from ftp.netperf.org (or a top-of-trunk svn snapshot from 
> http://www.netperf.org/svn/netperf2/trunk
> 
> and ./configure --enable-sctp , compile and use those binaries.
> 
> If the openss7 folks provide a source package in addition to binaries, you could 
> also go that route, but 2.3.7 is rather old these days...
> 
> happy benchmarking,
> 
> rick jones
> 
> > 
> > I hope somebody can help me.
> > 
> > regards
> > Frank
> > 
> > Output from netperf:
> > /usr/bin/netperf    -i 10,2 -I 99,5 -P 1 -l 60 -t SCTP_STREAM -H SERVER_IP_ADDRESS  -- -m 64 -s 16M -S 16M   
> > The test you requested is unknown to this netperf.
> > Please verify that you have the correct test name, 
> > and that test family has been compiled into this netperf.
> > ______________________________________________________
> > GRATIS für alle WEB.DE-Nutzer: Die maxdome Movie-FLAT!
> > Jetzt freischalten unter http://movieflat.web.de
> > 
> > _______________________________________________
> > netperf-talk mailing list
> > netperf-talk at netperf.org
> > http://www.netperf.org/cgi-bin/mailman/listinfo/netperf-talk
> 
> 

-- 
MfG
Frank Schuster
_______________________________________________________________
Neu: WEB.DE DSL bis 50.000 kBit/s und 200,- Euro Startguthaben!
http://produkte.web.de/go/02/