[netperf-talk] unkown response to debug check

[Rick Jones]

Clive Barker wrote:
> thanks for responding!
> 
> i added the -d option and it came out with
> 
> netperf -H 192.168.1.13 -p 4001 -d
> Program name: netperf
> Local send alignment: 8
> Local recv alignment: 8
> Remote send alignment: 8
> Remote recv alignment: 8
> Report local CPU 0
> Report remote CPU 0
> Verbosity: 1
> Debug: 1
> Port: 4001
> Test name: TCP_STREAM
> Test bytes: 0 Test time: 10 Test trans: 0
> Host name: 192.168.1.13
> 
> installing catcher for all signals
> remotehost is 192.168.1.13 and port 4001
> establish_control: connect completes
> recv_response: received a 256 byte response
> establish_control: Unknown response to debug check
> 

If you add several -d's netperf should start printing-out the messages it is 
sending and receiving.

Just for fun you might also start a netserver on the _local_ system and just try 
"netperf" and see if the loopback connection works ok.

rick jones