[netperf-talk] unkown response to debug check

[Clive Barker]

thanks for responding!

i added the -d option and it came out with

netperf -H 192.168.1.13 -p 4001 -d
Program name: netperf
Local send alignment: 8
Local recv alignment: 8
Remote send alignment: 8
Remote recv alignment: 8
Report local CPU 0
Report remote CPU 0
Verbosity: 1
Debug: 1
Port: 4001
Test name: TCP_STREAM
Test bytes: 0 Test time: 10 Test trans: 0
Host name: 192.168.1.13

installing catcher for all signals
remotehost is 192.168.1.13 and port 4001
establish_control: connect completes
recv_response: received a 256 byte response
establish_control: Unknown response to debug check






--- On Thu, 4/2/09, Rick Jones <rick.jones2 at hp.com> wrote:
From: Rick Jones <rick.jones2 at hp.com>
Subject: Re: [netperf-talk] unkown response to debug check
To: echelon360 at yahoo.com
Cc: netperf-talk at netperf.org
Date: Thursday, April 2, 2009, 4:56 PM

Clive Barker wrote:
> hi all,
> 
> i can't seem to get a packet going through via netperf
> 
> i've set up the server to listen to port 4001 and a standard telnet
(using port 4001) verifies this to be working.However, when i run the netperf
command
> 
> netperf -p 4003 -H 192.168.1.13
> i get an error as
> 
> "establish_control: Unknown response to debug check"
> 
> Pls advice if i'm missing something pls.

hmm, well, you could toss-in a bunch of -d's on your command line and see
what it is getting.  also you might check if the remote netserver is dying in an
unplanned way

rick jones



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.netperf.org/pipermail/netperf-talk/attachments/20090402/a13eda2a/attachment.htm