[netperf-talk] problem connecting to netserver

[Bahadir Balban]

Hi,

I am a newbie with netperf. Below is the command I am using and its
output. I can ping the target from host and vice versa. Also on the
target, netserver displays the message: "Starting netserver at port
12865", and ps aux lists netserver as one of running processes. What
further action should I take to debug the below problem?
I am using 2.6.15 kernel on target. The only issue I suspect is that
the target is running a bit slow (20Mhz)

Thanks,
Bahadir

netperf -d -v -h 10.1.202.155 -t TCP_STREAM -l 20 -- -m 64
Program name: netperf
Local send alignment: 8
Local recv alignment: 8
Remote send alignment: 8
Remote recv alignment: 8
Report local CPU 0
Report remote CPU 0
Verbosity: 0
Debug: 1
Port: 12865
Test name: TCP_STREAM
Test bytes: 0 Test time: 20 Test trans: 0
Host name: localhost

installing catcher for all signals
Could not install signal catcher for sig 9, errno 22
Could not install signal catcher for sig 19, errno 22
Could not install signal catcher for sig 65, errno 22
remotehost is localhost and port 12865
establish_control: control socket connect failed: Connection refused
Are you sure there is a netserver running on localhost at port 12865?